.. Document meta

:orphan:

.. |antsibull-internal-nbsp| unicode:: 0xA0
    :trim:

.. meta::
  :antsibull-docs: 2.26.0

.. Anchors

.. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module:

.. Anchors: short name for ansible.builtin

.. Title

stephrobert.scaleway.lb_frontend_info module -- Gather information about Scaleway Load Balancer frontends
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

.. Collection note

.. note::
    This module is part of the `stephrobert.scaleway collection <https://galaxy.ansible.com/ui/repo/published/stephrobert/scaleway/>`_ (version 0.7.0).

    It is not included in ``ansible-core``.
    To check whether it is installed, run :code:`ansible-galaxy collection list`.

    To install it, use: :code:`ansible\-galaxy collection install stephrobert.scaleway`.
    You need further requirements to be able to use this module,
    see :ref:`Requirements <ansible_collections.stephrobert.scaleway.lb_frontend_info_module_requirements>` for details.

    To use it in a playbook, specify: :code:`stephrobert.scaleway.lb_frontend_info`.

.. version_added

.. rst-class:: ansible-version-added

New in stephrobert.scaleway 0.1.0

.. contents::
   :local:
   :depth: 1

.. Deprecated


Synopsis
--------

.. Description

- Get the full details of a given frontend, specified by its frontend ID. The response contains the frontend's full configuration parameters including the backend it is attached to, the port it listens on, and any certificates it has.
- List all the frontends of a Load Balancer, specified by its Load Balancer ID. By default, results are returned in ascending order by the creation date of each frontend. The response is an array of frontend objects, containing full details of each one including the port they listen on and the backend they are attached to.


.. Aliases


.. Requirements

.. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module_requirements:

Requirements
------------
The below requirements are needed on the host that executes this module.

- scaleway \>= 2.9.0






.. Options

Parameters
----------

.. tabularcolumns:: \X{1}{3}\X{2}{3}

.. list-table::
  :width: 100%
  :widths: auto
  :header-rows: 1
  :class: longtable ansible-option-table

  * - Parameter
    - Comments

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-access_key"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-access_key:

      .. rst-class:: ansible-option-title

      **access_key**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-access_key" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Scaleway API access key.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-api_allow_insecure"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-api_allow_insecure:

      .. rst-class:: ansible-option-title

      **api_allow_insecure**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-api_allow_insecure" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Allow the API endpoint to be reached without verifying its TLS certificate.

      Falls back to the Scaleway configuration file, then to :literal:`false`.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry:`false`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-api_timeout"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-api_timeout:

      .. rst-class:: ansible-option-title

      **api_timeout**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-api_timeout" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`integer`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Seconds allowed for a single API call, connection and read.

      Without a limit a silent connection would hang the module forever: the Scaleway SDK issues its requests with no timeout at all.

      This bounds a single call, not a whole wait. Modules that can wait for a state bound the overall wait separately.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`60`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-api_url"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-api_url:

      .. rst-class:: ansible-option-title

      **api_url**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-api_url" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      URL of the Scaleway API endpoint.

      Point it at a local emulator to exercise a playbook without credentials.

      Falls back to the Scaleway configuration file, then to :literal:`https://api.scaleway.com`. It carries no module default on purpose: a default is never unset, so it would always override the profile.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config_file"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-config_file:

      .. rst-class:: ansible-option-title

      **config_file**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config_file" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`path`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Path to the Scaleway configuration file.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-frontend_id"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-frontend_id:

      .. rst-class:: ansible-option-title

      **frontend_id**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-frontend_id" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Frontend ID.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-lb_id"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-lb_id:

      .. rst-class:: ansible-option-title

      **lb_id**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-lb_id" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Load Balancer ID.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-name"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-name:

      .. rst-class:: ansible-option-title

      **name**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-name" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Name of the frontend to filter for.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-order_by"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-order_by:

      .. rst-class:: ansible-option-title

      **order_by**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-order_by" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Sort order of frontends in the response.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry:`"created\_at\_asc"`
      - :ansible-option-choices-entry:`"created\_at\_desc"`
      - :ansible-option-choices-entry:`"name\_asc"`
      - :ansible-option-choices-entry:`"name\_desc"`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-organization_id"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-organization_id:

      .. rst-class:: ansible-option-title

      **organization_id**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-organization_id" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Default Organization ID used when an operation does not name one.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-profile"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-profile:

      .. rst-class:: ansible-option-title

      **profile**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-profile" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Name of the profile to read in the Scaleway configuration file.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-project_id"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-project_id:

      .. rst-class:: ansible-option-title

      **project_id**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-project_id" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Default Project ID used when an operation does not name one.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-secret_key"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-secret_key:

      .. rst-class:: ansible-option-title

      **secret_key**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-secret_key" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Scaleway API secret key.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-user_agent"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-user_agent:

      .. rst-class:: ansible-option-title

      **user_agent**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-user_agent" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Value of the User\-Agent header sent to the API.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-zone"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__parameter-zone:

      .. rst-class:: ansible-option-title

      **zone**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-zone" title="Permalink to this option"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string` / :ansible-option-required:`required`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      The zone you want to target


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry:`"fr\-par\-1"`
      - :ansible-option-choices-entry:`"fr\-par\-2"`
      - :ansible-option-choices-entry:`"nl\-ams\-1"`
      - :ansible-option-choices-entry:`"nl\-ams\-2"`
      - :ansible-option-choices-entry:`"nl\-ams\-3"`
      - :ansible-option-choices-entry:`"pl\-waw\-1"`
      - :ansible-option-choices-entry:`"pl\-waw\-2"`
      - :ansible-option-choices-entry:`"pl\-waw\-3"`


      .. raw:: html

        </div>


.. Attributes


Attributes
----------

.. tabularcolumns:: \X{2}{10}\X{3}{10}\X{5}{10}

.. list-table::
  :width: 100%
  :widths: auto
  :header-rows: 1
  :class: longtable ansible-option-table

  * - Attribute
    - Support
    - Description

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="attribute-check_mode"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__attribute-check_mode:

      .. rst-class:: ansible-option-title

      **check_mode**

      .. raw:: html

        <a class="ansibleOptionLink" href="#attribute-check_mode" title="Permalink to this attribute"></a>

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      :ansible-attribute-support-label:`Support: \ `\ :ansible-attribute-support-full:`full`


      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      This module only reads, so check mode changes nothing about how it runs.


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="attribute-diff_mode"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__attribute-diff_mode:

      .. rst-class:: ansible-option-title

      **diff_mode**

      .. raw:: html

        <a class="ansibleOptionLink" href="#attribute-diff_mode" title="Permalink to this attribute"></a>

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      :ansible-attribute-support-label:`Support: \ `\ :ansible-attribute-support-none:`none`


      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      This module changes nothing, so it has no difference to report.


      .. raw:: html

        </div>



.. Notes

Notes
-----

.. note::
   - Every option can be set from its environment variable, respectively :literal:`SCW\_PROFILE`\ , :literal:`SCW\_CONFIG\_PATH`\ , :literal:`SCW\_ACCESS\_KEY`\ , :literal:`SCW\_SECRET\_KEY`\ , :literal:`SCW\_API\_URL`\ , :literal:`SCW\_DEFAULT\_ORGANIZATION\_ID` and :literal:`SCW\_DEFAULT\_PROJECT\_ID`.
   - Module options take precedence over environment variables, which take precedence over the configuration file.

.. Seealso


.. Examples

Examples
--------

.. code-block:: yaml+jinja

    # This module only reads: it never changes anything, and check mode
    # is native.
    #
    # `frontend_id` decides which of the two reads runs: given, the
    # module returns that one resource; omitted, it lists them all,
    # walking every page rather than returning the first one in silence.

    - name: Get a frontend
      stephrobert.scaleway.lb_frontend_info:
        zone: fr-par-1
        frontend_id: 11111111-2222-3333-4444-555555555555
      register: result
    - name: List frontends of a given Load Balancer
      stephrobert.scaleway.lb_frontend_info:
        zone: fr-par-1
      register: result
    - name: Filter Scaleway Load Balancer frontends by name
      stephrobert.scaleway.lb_frontend_info:
        zone: fr-par-1
        name: my-frontend-info
      register: result



.. Facts


.. Return values

Return Values
-------------
Common return values are documented :ref:`here <common_return_values>`, the following are the fields unique to this module:

.. tabularcolumns:: \X{1}{3}\X{2}{3}

.. list-table::
  :width: 100%
  :widths: auto
  :header-rows: 1
  :class: longtable ansible-option-table

  * - Key
    - Description

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends:

      .. rst-class:: ansible-option-title

      **frontends**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`list` / :ansible-option-elements:`elements=dictionary`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      List all the frontends of a Load Balancer, specified by its Load Balancer ID. By default, results are returned in ascending order by the creation date of each frontend. The response is an array of frontend objects, containing full details of each one including the port they listen on and the backend they are attached to.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when :emphasis:`frontend\_id` is omitted


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/backend"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/backend:

      .. rst-class:: ansible-option-title

      **backend**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/backend" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`dictionary`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Backend object the frontend is attached to.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/certificate"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/certificate:

      .. rst-class:: ansible-option-title

      **certificate**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/certificate" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`dictionary`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Certificate, deprecated in favor of certificate\_ids array.

      Deprecated by the Scaleway API contract.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/certificate_ids"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/certificate_ids:

      .. rst-class:: ansible-option-title

      **certificate_ids**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/certificate_ids" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`list` / :ansible-option-elements:`elements=string`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      List of SSL/TLS certificate IDs to bind to the frontend.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/connection_rate_limit"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/connection_rate_limit:

      .. rst-class:: ansible-option-title

      **connection_rate_limit**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/connection_rate_limit" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`integer`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Rate limit for new connections established on this frontend. Use 0 value to disable, else value is connections per second.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/created_at"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/created_at:

      .. rst-class:: ansible-option-title

      **created_at**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/created_at" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Date on which the frontend was created. (RFC 3339 format)


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/enable_access_logs"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/enable_access_logs:

      .. rst-class:: ansible-option-title

      **enable_access_logs**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/enable_access_logs" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`boolean`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Defines whether to enable access logs on the frontend.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/enable_http3"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/enable_http3:

      .. rst-class:: ansible-option-title

      **enable_http3**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/enable_http3" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`boolean`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Defines whether to enable HTTP/3 protocol on the frontend.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/id"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/id:

      .. rst-class:: ansible-option-title

      **id**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/id" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Frontend ID.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/inbound_port"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/inbound_port:

      .. rst-class:: ansible-option-title

      **inbound_port**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/inbound_port" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`integer`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Port the frontend listens on.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/lb"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/lb:

      .. rst-class:: ansible-option-title

      **lb**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/lb" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`dictionary`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Load Balancer object the frontend is attached to.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/name"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/name:

      .. rst-class:: ansible-option-title

      **name**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/name" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Name of the frontend.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/timeout_client"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/timeout_client:

      .. rst-class:: ansible-option-title

      **timeout_client**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/timeout_client" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`float`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Maximum allowed inactivity time on the client side. (in milliseconds)


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-frontends/updated_at"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-frontends/updated_at:

      .. rst-class:: ansible-option-title

      **updated_at**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-frontends/updated_at" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Date on which the frontend was last updated. (RFC 3339 format)


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>



  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result"></div>

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result:

      .. rst-class:: ansible-option-title

      **result**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`dictionary`

      :ansible-option-versionadded:`added in stephrobert.scaleway 0.4.0`


      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Get the full details of a given frontend, specified by its frontend ID. The response contains the frontend's full configuration parameters including the backend it is attached to, the port it listens on, and any certificates it has.

      The API contract names no payload field for this operation: the response body is returned as is.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when :emphasis:`frontend\_id` is provided


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/backend"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/backend:

      .. rst-class:: ansible-option-title

      **backend**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/backend" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`dictionary`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Backend object the frontend is attached to.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/certificate"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/certificate:

      .. rst-class:: ansible-option-title

      **certificate**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/certificate" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`dictionary`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Certificate, deprecated in favor of certificate\_ids array.

      Deprecated by the Scaleway API contract.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/certificate_ids"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/certificate_ids:

      .. rst-class:: ansible-option-title

      **certificate_ids**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/certificate_ids" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`list` / :ansible-option-elements:`elements=string`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      List of SSL/TLS certificate IDs to bind to the frontend.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/connection_rate_limit"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/connection_rate_limit:

      .. rst-class:: ansible-option-title

      **connection_rate_limit**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/connection_rate_limit" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`integer`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Rate limit for new connections established on this frontend. Use 0 value to disable, else value is connections per second.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/created_at"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/created_at:

      .. rst-class:: ansible-option-title

      **created_at**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/created_at" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Date on which the frontend was created. (RFC 3339 format)


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/enable_access_logs"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/enable_access_logs:

      .. rst-class:: ansible-option-title

      **enable_access_logs**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/enable_access_logs" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`boolean`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Defines whether to enable access logs on the frontend.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/enable_http3"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/enable_http3:

      .. rst-class:: ansible-option-title

      **enable_http3**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/enable_http3" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`boolean`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Defines whether to enable HTTP/3 protocol on the frontend.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/id"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/id:

      .. rst-class:: ansible-option-title

      **id**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/id" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Frontend ID.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/inbound_port"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/inbound_port:

      .. rst-class:: ansible-option-title

      **inbound_port**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/inbound_port" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`integer`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Port the frontend listens on.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/lb"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/lb:

      .. rst-class:: ansible-option-title

      **lb**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/lb" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`dictionary`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Load Balancer object the frontend is attached to.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/name"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/name:

      .. rst-class:: ansible-option-title

      **name**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/name" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Name of the frontend.


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/timeout_client"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/timeout_client:

      .. rst-class:: ansible-option-title

      **timeout_client**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/timeout_client" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`float`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Maximum allowed inactivity time on the client side. (in milliseconds)


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-result/updated_at"></div>

      .. raw:: latex

        \hspace{0.02\textwidth}\begin{minipage}[t]{0.3\textwidth}

      .. _ansible_collections.stephrobert.scaleway.lb_frontend_info_module__return-result/updated_at:

      .. rst-class:: ansible-option-title

      **updated_at**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-result/updated_at" title="Permalink to this return value"></a>

      .. ansible-option-type-line::

        :ansible-option-type:`string`

      .. raw:: html

        </div>

      .. raw:: latex

        \end{minipage}

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Date on which the frontend was last updated. (RFC 3339 format)


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` when the API returns it


      .. raw:: html

        </div>




..  Status (Presently only deprecated)


.. Authors

Authors
~~~~~~~

- Stéphane Robert (@stephrobert)


.. Extra links

Collection links
~~~~~~~~~~~~~~~~

.. ansible-links::

  - title: "Issue Tracker"
    url: "https://github.com/stephrobert/collection-scaleway/issues"
    external: true
  - title: "Repository (Sources)"
    url: "https://github.com/stephrobert/collection-scaleway"
    external: true


.. Parsing errors